routing between a layer 2 and a layer 3 switch

[osamafaheem1974]

I am trying to ping from a pc LAN 1 to a Webserver having IP address 8.8.8.8. The PC LAN 1 is a VLAN 20 having IP address 10.1.20.10 subnet mask 255.255.255.0 and I have designed a switch virtual interface (svi) for it having IP address 10.1.20.254 subnet mask 255.255.255.0. LAN 1 is connected to a layer 3 Multilayer switch and the Multilayer switch is connected to layer 2 switch and from layer 2 switch it is connected to a router having internal interface IP 10.1.11.10 subnet mask 255.255.255.0

Now whenever I am trying to ping 10.1.11.10 getting message Reply from 10.1.20.254: Destination host unreachable.

Please advice what to do I have also attached the image file although I tried to make it clear so please zoom it and please help

[Georg Pauwen · Accepted solution]

Hello,

post the Packet Tracer file (save the project as .pkt, then rename it to .jpg, otherwise you cannot upload it)...

[osamafaheem1974]

Hello George

I was able to rename it to jpg but when I tried to upload it, gave me error Uploading test26.jpg resulted in the following error: Error Code: Invalid File Type, although Windows is showing it as Type of file jpg file

Is there any way to send you the file