cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
558
Views
0
Helpful
1
Replies

routing DNS through VLANs on Catalyst 3750

wolfunr04
Beginner
Beginner

Hello, I am hoping someone might be able to help with a issue I am having. I implemented a Catalyst 3750 Layer 3 switch which connects to 8 other Cisco switches all layer 2. This is in a hub and spoke topology right now. I have VLANs 1,10,20,30,40,50 and all of them route fine, if I am on VLAN 20 I can talk to all other VLANs and this is recursive on all VLANs.

The issue is, if I am on VLAN 1 I can receive DNS ping requests from all resources on the network. If I am on another VLAN I can't get requests back. I am able to ping the interface at the IP level but not by name. I have tried entering the IP Name Servers, IP domain-lookup, ip domain name etc...on the 3750 but to no luck.

So the question is, how can I get DNS ping requests to route through the VLANs?

Thanks for the help!

1 Reply 1

Peter Paluch
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

Hi Scott,

The issue is, if I am on VLAN 1 I can receive DNS ping requests from all  resources on the network. If I am on another VLAN I can't get requests  back. I am able to ping the interface at the IP level but not by name. I  have tried entering the IP Name Servers, IP domain-lookup, ip domain  name etc...on the 3750 but to no luck.

I apologize but this description is not very precise and I am having trouble understanding what works, what not, under what circumstances and what exactly are you doing to test the connectivity.

Can you perhaps post a transcript of the session where you type in the commands that produce either a successful or unsuccessful result? Seeing that would be most helpful.

Best regards,

Peter

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers