10-12-2011 12:28 PM - edited 03-07-2019 02:46 AM
I was attempting to configure an RSPAN session from one of my clients access layer switches. here is what I am getting when i get the error that I receive
tbh7#conf t
Enter configuration commands, one per line. End with CNTL/Z.
tbh7(config)#monitor session 1 destination remote vlan 25
^
% Invalid input detected at '^' marker.
tbh7(config)#
The version is
tbh7#sho ver
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Sat 07-Aug-10 23:21 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x01B00000
ROM: Bootstrap program is Alpha board boot loader
BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(53r)SE, RELEASE SOFTWARE (fc3)
tbh7 uptime is 14 weeks, 2 days, 1 hour, 15 minutes
System returned to ROM by power-on
System restarted at 13:57:28 EST Mon Jul 4 2011
System image file is "flash:/c2960s-universalk9-mz.122-55.SE.bin"
Is the code on this not capable of RSPAN?
Thx
Kevin
Solved! Go to Solution.
10-12-2011 12:34 PM
Do you have LAN base IOS license installed?
To use RSPAN, the switch must be running the LAN Base image.
HTH
10-12-2011 12:34 PM
Do you have LAN base IOS license installed?
To use RSPAN, the switch must be running the LAN Base image.
HTH
10-12-2011 01:13 PM
Thanks for the quick resonse, Reza!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide