01-12-2010 08:48 PM - edited 03-06-2019 09:16 AM
Can i configure etherchannel and group each respective port on different switches as an etherchannel group ?
Example : 2 C2960 switch separately connected to a C3750
Thanks
01-12-2010 09:03 PM
No.
01-12-2010 09:41 PM
thanks
01-13-2010 05:15 PM
Can configure etherchannel on switchport access mode without vlan tagging ? ?
01-13-2010 05:38 PM
Do you mean configure the etherchannel as access port with no vlan tag?
Yes, you can do the following on the etherchannel (PO)
switchport mode access
switchport access vlan xyz
Regards,
jerry
01-13-2010 05:44 PM
Jerry
only this command "switchport mode access"
without this command "switchport access vlan xyz"
something like trunk mode
01-13-2010 05:45 PM
Then the untagged vlan will be vlan 1 and this is the default.
Regards,
jerry
01-13-2010 09:41 PM
Thanks Jerry
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide