sdm setup

[sarahr202]

Hi everybody.

I am trying to use SDM to configure VPN.

Below is my set up

PC----------R1

i have installed SDM on PC; When I launch SDM, a window pops up asking for username and password  at level 15

What do I need to do at R1 to make it work?

thanks and have a great day.

[Bilal Nawaz · Accepted solution]

Hello Sarah,

I think you need to do the following:

Conf t
!
Username admin privilege 15 password 0 xxxxxxx
!
Ip http server
Ip http secure server
Ip http authentication local
!
Line vty 0 15
Privilege level 15
Login local

Then save config and try again.

Hope this helps.

Sent from Cisco Technical Support iPhone App

[Bilal Nawaz · Accepted solution]

http://www.cisco.com/en/US/docs/routers/7200/maintain_and_operate/security_device_mgr_guide.7200.7301/sdm7k2_3.html

Sent from Cisco Technical Support iPhone App