10-28-2019 01:13 AM
Hi All,
I am using a Cisco 3560 Switch and I have observed that "show clock" displays the correct time as mine but when I check logs, it shows the time 5 Hours behind me. It can be considered as the switch is showing time related to GMT timezone as where I live, timezone is GMT +5. To counter this and show logs with time as per my local timezone i tried running the following command:
service timestamps log datetime localtime
This command has worked for me on other switches but this specific switch is giving invalid marker at "service". Is there any other way or any solution to this?
10-28-2019 01:32 AM
This is odd, can you show us an example of the difference.
post the output of
show clock
show run | in clock
show ntp status
show version
post the logs in which you see the discrepancy ?
Compare the IOS version working vs not working
10-28-2019 02:25 AM
Switch#show clock
14:22:51.046 PKT Mon Oct 28 2019
Switch#show run | in clock
clock timezone PKT 5 0
NTP is not enabled
Switch#show version
Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M), Version 15.0(2)SE11, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Sat 19-Aug-17 09:21 by prod_rel_team
ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEE4, RELEASE SOFTWARE (fc1)
Switch uptime is 25 weeks, 6 days, 17 hours, 21 minutes
System returned to ROM by power-on
System restarted at 20:39:45 PKT Mon Apr 29 2019
System image file is "flash:/c3560-ipbasek9-mz.150-2.SE11.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C3560G-24TS (PowerPC405) processor (revision D0) with 131072K bytes of memory.
Processor board ID FOC1143Y30S
Last reset from power-on
9 Virtual Ethernet interfaces
28 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:1E:14:05:AC:00
Motherboard assembly number : 73-10215-04
Power supply part number : 341-0098-02
Motherboard serial number : FOC11431PKA
Power supply serial number : AZS114225QX
Model revision number : D0
Motherboard revision number : B0
Model number : WS-C3560G-24TS-E
System serial number : FOC1143Y30S
Top Assembly Part Number : 800-27480-01
Top Assembly Revision Number : B0
Version ID : V03
CLEI Code Number : CNMW400ARC
Hardware Board Revision Number : 0x09
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 28 WS-C3560G-24TS 15.0(2)SE11 C3560-IPBASEK9-M
Configuration register is 0xF
Switch#show logging
Oct 28 07:09:30.529: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/25, changed state to down
Oct 28 07:09:31.536: %LINK-3-UPDOWN: Interface GigabitEthernet0/25, changed state to down
Oct 28 07:09:34.237: %LINK-3-UPDOWN: Interface GigabitEthernet0/25, changed state to up
Oct 28 07:09:36.267: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/25, changed state to up
Oct 28 07:10:20.702: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/25, changed state to down
Oct 28 07:10:21.708: %LINK-3-UPDOWN: Interface GigabitEthernet0/25, changed state to down
Oct 28 07:17:14.486: %LINK-3-UPDOWN: Interface GigabitEthernet0/25, changed state to up
Oct 28 07:17:16.516: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/25, changed state to up
These fluctuations started at 12:09 Hrs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide