setting static ip address

[fb_webuser]

how to set static ip address in packet tracers?

---

Posted by WebUser Allan Lim

[johnlloyd_13]

Hi Alan,

If it's a PC go to 'Config' tab and under 'Global Settings', you'll see a field for the 'Gateway.' Enter the IP address of the router’s LAN interface. Click the 'FastEthernet' tab on the left panel to set the host IP address and subnet mask.

Click the 'Desktop' tab, open a command or DOS prompt and type 'ipconfig' to verify. 

Let me know if it's a router you're referring to. Enjoy labbing! ;)

Sent from Cisco Technical Support iPhone App

[fb_webuser]

but i mean packet tracer there is one big network,so how?

---

Posted by WebUser Allan Lim

[johnlloyd_13]

Hi,

I can't help you further without giving any info or posting your .pkt file of the network you're referring to. I would suggest you start reading this link:

http://learn-networking.com/network-design/configure-a-router-with-packet-tracer

Sent from Cisco Technical Support iPhone App