cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1357
Views
0
Helpful
3
Replies
Highlighted
Beginner

SFP-10G-SR-S support FCOE or Not ?? I'm try to test...Why it's working ???

https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/data_sheet_c78-455693.html

This doccument explan 10G-SR-S not support FCOE , I'm try to test ... why it's working ?? , i already connect FCOE b/w Fi 6324 and N5K-16G  FCOE status is up and found wwpn,wwnn both N5K and UCS ??? 10G-SR-S (Class 1) support FCOE ??

3 REPLIES 3
Highlighted
VIP Expert

Re: SFP-10G-SR-S support FCOE or Not ?? I'm try to test...Why it's working ???

Not sure about your setup, but if the port on the blade is FCOE port, you still need to use the right FC optics to connect to it.10G-SR-S, LR, etc... are Ethernet optics and not FC.

HTH

Highlighted
Cisco Employee

Re: SFP-10G-SR-S support FCOE or Not ?? I'm try to test...Why it's working ???

Not supported by TAC. It may "work", but it's not qualified. Probably internal electronics are not quite up to stringent FCoE standards, but enough for Ethernet, hence cheaper. Cheers.

Highlighted
Contributor

Re: SFP-10G-SR-S support FCOE or Not ?? I'm try to test...Why it's working ???

you can run FCoE over Ethernet transceivers. The only gotcha is if you want to run native Fiber Channel with native FC ports if you have a Universal Port chassis then we dont support it.

CreatePlease to create content
Content for Community-Ad