08-30-2017 09:30 AM - edited 03-08-2019 11:53 AM
This doccument explan 10G-SR-S not support FCOE , I'm try to test ... why it's working ?? , i already connect FCOE b/w Fi 6324 and N5K-16G FCOE status is up and found wwpn,wwnn both N5K and UCS ??? 10G-SR-S (Class 1) support FCOE ??
08-30-2017 10:05 AM
Not sure about your setup, but if the port on the blade is FCOE port, you still need to use the right FC optics to connect to it.10G-SR-S, LR, etc... are Ethernet optics and not FC.
HTH
05-17-2018 11:00 AM
Not supported by TAC. It may "work", but it's not qualified. Probably internal electronics are not quite up to stringent FCoE standards, but enough for Ethernet, hence cheaper. Cheers.
06-26-2023 05:14 AM
Hello Reza,
do you know which sfps can be used to connect N5600 with a Brocade switch for building s FCOE can be used?
Thanks in advance
06-19-2018 12:34 AM
you can run FCoE over Ethernet transceivers. The only gotcha is if you want to run native Fiber Channel with native FC ports if you have a Universal Port chassis then we dont support it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide