cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
185
Views
0
Helpful
1
Replies
peram
Beginner

SG200-50 and SG250-08HP in homelab with vlans

hi all.  First time poster here...

 

I'm having a hard time setting up my homelab.  this is what I want to achieve :

  • two separate vlans
    • VLAN10 for work-related stuff
    • VLAN20 for home-related stuff
  • the SG200 located in my techroom in the basement and the SG250 located in my study
  • have a single, trunked connection between the switch in the basement and the switch on my desktop
  • port GE1-3 on the SG250-08 beeing in VLAN20
  • port GE01-06 and GE25-30 on the SG200-50 beeing in VLAN20
  • port GE4-6 on the SG250-08 beeing in VLAN10
  • port GE13-18 and GE37-42 on the SG200-50 beeing in VLAN10
  • port GE8 on the SG250-08 as the trunkport
  • port GE50 on the SG200-50 as the trunkport.

I have googled, looked at youtube videos for the last several days and can not for the life of me get the setup to work. I am 100% certain that it is my lacking knowledge that makes me overlook something, but I'm in desperate need for some assistance.  See attached screenshot for how I have set it up right now.

 

If I connect two PC's in port 13 and 14 on the SG200 they can ping each other.  If I connect port GE8 on the 250 to port 50 on the SG200, and one PC in port 4 on the SG250 the ping dies.

 

Screenshots from the SG250 and from the SG200-50 are attached.

 

Thanks in advance

peram

1 ACCEPTED SOLUTION

Accepted Solutions
peram
Beginner

Hi again.  Sort of embarrassing solution to my problem. It helps to connect the trunk ports together.

 

Sorry for the noise

 

peram 

View solution in original post

1 REPLY 1
peram
Beginner

Hi again.  Sort of embarrassing solution to my problem. It helps to connect the trunk ports together.

 

Sorry for the noise

 

peram 

View solution in original post