sg250-08 network switch will be able to use the dynamic IP address?

[mxl]

Hello! sg250-08 network switch will be able to work the dynamic IP address? work without a static ip address. 

Thank you

[Richard Burts]

I found this statement mentioning use of dynamic addressing in the sg250 switch "When the switch is using a DHCP server-assigned IP address" in this document "https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbss/sf_sg250/quick_start/guide/en_US/78-100762-01A0.pdf" if you want additional details.

[pman · Accepted solution]

yes.

IPv4 routing

Wire-speed routing of IPv4 packets Up to 32 static routes and up to 16 IP interfaces

Layer 3 interface

Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface

https://www.cisco.com/c/en/us/products/collateral/switches/250-series-smart-switches/datasheet-c78-737061.html#Productspecifications

[Georg Pauwen]

Hello, 

you can use manual/static and DHCP assigned IPv4 addresses:

https://www.cisco.com/c/en/us/td/docs/switches/lan/csbms/250_/2_5_7/Admin_guide/tesla-250-ag/ipconfig.html#ID-0000410c

[mxl]

Thank you all!