10-21-2019 07:30 AM
No matter what port I plug it into the Sg500 the Sg250x reboots after a minute or so. Very frustrating.
Solved! Go to Solution.
10-31-2019 07:41 AM
Turns out the reason it was crashing was because IPV6 was turned off on the SG250x. It had something in the log about DHCPV6 crash
10-21-2019 08:01 AM
- Connect a serial console to the failing device, try to capture the problematic outputs (preferable through a logging-console methodology , so you can review the output afterwards).
M.
10-21-2019 10:15 AM
Hello,
check the document below for optimized port settings on the 250...
10-31-2019 07:41 AM
Turns out the reason it was crashing was because IPV6 was turned off on the SG250x. It had something in the log about DHCPV6 crash
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide