09-14-2017 02:45 AM - edited 03-08-2019 12:01 PM
Hello Support Community,
I`ve got a quite interesting scenario and I just can`t help myself..
Is anyone knows the answer ?
09-14-2017 04:51 AM
It seems to be your PC cannot reach anything that is not layer 2 adjacent which may suggest a Gateway problem. Is your PC using 10.1.10.1 as its GW?
To reach anything not on the 10.1.10.0/24 network from the PC it will need a Gateway configured.
09-14-2017 04:56 AM
Hi
Could you please share your configurations?
09-14-2017 11:42 AM
Hello Julio,
Thanks for being interested.. It is a wierd kind of problem, never came accross like this. Will upload the config soon.
09-14-2017 12:32 PM
Hello,
is your switch operating in layer 2 or layer 3 mode ?
09-14-2017 11:41 AM
Hello Grant,
Thanks for the quick reply, nope, that shouldn`t be the Gateway..
The PC is having a succesful dhcp, so the R1 - as the dhcp server - is saying it is the gateway.
SW1 also knows about R1 as its gateway ( configured statically)
There is no difference if the PC is takes its ip address through dhcp or it is been statically addressed by the ping perspective...
I will upload the configuration soon.
09-14-2017 12:13 PM
Might be worth running wireshark on the PC and see if the icmp traffic from the other networks are getting to the PC at least. You should be able to then tell if reply traffic is returned from PC. If so, gives you an idea as to where the issue may be.
You can do similar on the network kit with captures/debugs but wireshark on pc probably quickest.
09-18-2017 02:59 AM
Good Morning,
I was working to solve the problem, but with not to much luck. So, here , let me upload the configs.
Exact Topology : Laptop --MAIN-RT --Fiber SW ( L3-3750) xxxxx Branch SW (SG300)--Branch RT -- Laptop
Got perfect ping between Main RT-<>-Branch (back n forth)
I believe something wrong with the routing..
Thanks for your comments !
09-18-2017 03:05 AM
09-18-2017 03:06 AM
09-20-2017 07:49 AM
Hi,
Having a bit of trouble matching your configs to the diagram. As an example, your diagram states an address of 172.16.1.254 on G0/1 of R1 which i am assuming is the branch router. I can't see this on any configs attached. I also cannot see 172.16.1.1 in any of the configs which is supposed to be configured on router 2.
How are these routers connected? All through the same switch? You may want to update the diagram exactly how it all connects with ports and also the switch configs as some of the info doesn't seem to tally up from what I can see.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide