SG350 10MP dont give internet to second vlan

[Ioannis Argyropoulos]

Hello team, before i start ill write my network topology.

At home i have a modem-router provided by my ISP. From this router, a lan cable is conected to a ubnt antena. 

At store i have an antenna (reciever) who is connected to my cisco switch. On the cisco switch i have connected 3 ip cameras, 1 desktop and a cisco ac WAP 125. So far so good, system is running, have internet but takes ip address home router.

Cisco switch has ip 192.168.1.150. 

My idea is that i want to isolate the access point guest users from my network and cisco switch works as dhcp server for all my connected devices at store. 

I have created a second VLAN for ethernet port G8 ( the port of ac), and i gave static ip 192.168.2.150 for the switch. 

I also created the dhcp pools and i enable the dhcp server.

The second vlan dont get internet. I tried to create a static route but the static route is automatically attached to vlan1.

Any ideas ? :D 

[balaji.bandi]

Do you have routing and NAT in place for 192.168.2.X  range to reach internet ?

[Ioannis Argyropoulos]

the sg 350 has no NAT to configure so i have to rely on my router. I have a TG789vac v2 and i cant set up nat. So i start thinkig that i need to change that router.