cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
732
Views
0
Helpful
2
Replies

SG350 remote access from vlan210 to vlan1

IAmSeth
Level 1
Level 1

I am trying to setup the switch SG350 to allow remote access to the web interface from another vlan that will below to IT group.

Vlan 1 = 192.168.0.254 255.255.255.0 no port connected

Vlan200 = 192.168.200.254 255.255.255.0 port 1 connected

Ip routing enabled

 

Do i need to setup access group to improve security?

I was working on older switches up until now and to enable remote access i had to generate RSA key, is it a case on the SG350 switch too?

 

All help will be much appreciated.

2 Replies 2