01-16-2019 06:41 AM - edited 03-08-2019 05:03 PM
Hi guys,
I have a problem with SG500x and VLANs
I have 7 SG500X in my stack with a few VLANs, my ports are configured as Trunks
Every time I connect a Cisco IP phone the VLANs on that port and a few others get all messed up
e.g. if Unit 6 port 23 is on VLAN 2UP and I connect a phone to it, the port will get messed up and will get ALL the VLANs that I have (1UP, 2T, 3T, 4T, 5T...)
Any idea on how to fix this?
Thanks
Solved! Go to Solution.
01-16-2019 07:22 AM
maybe you are hitting this functionality of the SG
Dynamic Voice VLAN Modes
The device supports two dynamic voice VLAN modes: Telephony OUI (Organization Unique Identifier) mode and Auto Voice VLAN mode. The two modes affect how voice VLAN and/or voice VLAN port memberships are configured. The two modes are mutually exclusive to each other
=> you may need to change using:
STEP 1 Click VLAN Management > Voice VLAN > Properties
01-16-2019 07:22 AM
maybe you are hitting this functionality of the SG
Dynamic Voice VLAN Modes
The device supports two dynamic voice VLAN modes: Telephony OUI (Organization Unique Identifier) mode and Auto Voice VLAN mode. The two modes affect how voice VLAN and/or voice VLAN port memberships are configured. The two modes are mutually exclusive to each other
=> you may need to change using:
STEP 1 Click VLAN Management > Voice VLAN > Properties
01-17-2019 05:59 AM
Thanks for the reply
I will test it and get back to you...
01-17-2019 10:43 AM
This work perfectly
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide