SG550XG-24F SNMP Configure

[Michalis Tsimettas]

Dear Community,

I hope I find you all well, i want to confiqure my switch SG550XG-24F SNMP to communicate with my Network Monitoring System(LibreNMS) . I attach you my confiquration:

snmp-server community elysium ro view Default
snmp-server host 192.168.25.24 traps version 2c elysium

The 192.168.25.24 is my LibreNMS Monitoring System.

[Flavio Miranda]

Hi

 The snmp config seems to be fine.  You need to have default gateway on the switch and IP address.

[Michalis Tsimettas]

Good Morning  Miranda,

Thank you for your answer but the problem was not solved, i attach you the messages from the Librenms server .

[Flavio Miranda]

Can you access this server 192.168.25.24 via CLI? And then ping the switch 192.168.250.9 ?

First thing they need to have connectivity.

[Michalis Tsimettas]

Dear Miranda,

Yes of course, and i can ping server from switch and the same from Server to the switch.

[Flavio Miranda]

Check if the SNMP service is enable on the switch. I prefer handle this switch using web interface.