01-20-2012 03:19 AM - edited 03-07-2019 04:27 AM
We have a number of 4507s. Most are managed via VLAN 1 address. All have multiple VLANS for traffic control. When I do a show ARP or show IP ARP the command only shows VLAN 1 info. No entries for any of the other VLANS on the switch. Any thoughts as to what I am doing wrong?
Gabe
01-20-2012 04:23 AM
You will only see arp entries if the switch has a layer 3 interfaces for that vlan. Vlan1 has an ip that is why you see arp entires. For the other vlans you will only see layer2 , mac addresses
Sent from Cisco Technical Support iPhone App
01-20-2012 05:12 AM
Are you trying to see the addresses that the switch has learned for its locally-generated traffic, or are you trying to look at the table of addresses learned by the switch for forwarding?
If the latter, try one of the following:
show mac-address-table
show mac address-table
Best regards,
Ed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide