Is there a way to get the IOS equivelant command for "Show interface status" on a 3500XL running ver 12.0(5)XU? I just started depoying these and can only look at the "Show interface status fastethernet 0/X". I't like to see single line entries with the basic stuff - port number, vlan, status, connected at X speed, etc.
Also, can someone point me to the highest rev I can put on these guys?
Thanks,
John Supple
Here's a show ver from the switch:
phi-delta-theta#show ver
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)XU, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 03-Apr-00 17:31 by swati
Image text-base: 0x00003000, data-base: 0x00301398
ROM: Bootstrap program is C3500XL boot loader
phi-delta-theta uptime is 11 hours, 49 minutes
System returned to ROM by power-on
System restarted at 09:21:06 CDT Tue Oct 19 2010
System image file is "flash:c3500XL-c3h2s-mz-120.5-XU.bin"
cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes of memory.
Processor board ID 0x17, with hardware revision 0x00
Last reset from power-on
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:02:4B:DD:14:40
Motherboard assembly number: 73-3903-04
Power supply part number: 34-0971-01
Motherboard serial number: FAA04249KFB
Power supply serial number: PAC0421027U
Model revision number: A0
Motherboard revision number: B0
Model number: WS-C3548-XL-EN
System serial number: FAA0425K09H
Configuration register is 0xF
phi-delta-theta#
