cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
671
Views
0
Helpful
1
Replies
Ibrahim Jamil
Frequent Contributor

show interface

Hi Folks

Can y please analyze the below output and tell me what is the ubnormal behavior

5 minute input rate 10869000 bits/sec, 1644 packets/sec
  5 minute output rate 2763000 bits/sec, 1230 packets/sec
  L2 Switched: ucast: 202139269872 pkt, 183023776803956 bytes - mcast: 1251122628 pkt, 507594175318 bytes
  L3 in Switched: ucast: 108707164389 pkt, 69059201016286 bytes - mcast: 0 pkt, 0 bytes mcast
  L3 out Switched: ucast: 85443883374 pkt, 25252941131536 bytes mcast: 0 pkt, 0 bytes
     108673909639 packets input, 69254675761313 bytes, 0 no buffer
     Received 505445665 broadcasts, 0 runts, 0 giants, 153 throttles

what this mean L2 Switched and L3 Switched

1 REPLY 1
royalblues
Advocate

The lines beginning L2 Switched ndicate the hardware-switching statistics.

L3 in Switched would mean traffic is being punted to the CPU

have a look here under Utilities and Tools to Determine the Traffic That Is Punted to the CPU

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a00804916e0.shtml

HTH

Narayan