02-14-2022 08:36 AM
I'm trying to see if the packets for a class-map I set is within the rate that I set in my policy-map, how many packets dropped, etc but when I do show policy-map control-plane, there is no output:
#show policy-map control-plane
Load for five secs: 1%/0%; one minute: 6%; five minutes: 7%
Time source is NTP,....
I only set class-map for routing protocols and icmp , and I would like to see what are other traffic that matching the class-default and going through the control plane.
Thanks
02-14-2022 09:59 AM
Can you tell us what type of device you are using? Also, can you post the "policy-map" configuration?
HTH
02-14-2022 11:11 AM
Hello,
does 'show policy-map control-plane all' reveal anything ?
02-14-2022 12:27 PM
no, nothing.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide