#show policy-map control-plane

[D@1984]

I'm trying to see if the packets for a class-map I set is within the rate that I set in my policy-map, how many packets dropped, etc but when I do show policy-map control-plane, there is no output: 

#show policy-map control-plane
Load for five secs: 1%/0%; one minute: 6%; five minutes: 7%
Time source is NTP,....

I only set class-map for routing protocols and icmp , and I would like to see what are other traffic that matching the class-default and going through the control plane.

Thanks

[Reza Sharifi]

Can you tell us what type of device you are using? Also, can you post the "policy-map" configuration?

HTH 

[Georg Pauwen]

Hello,

does 'show policy-map control-plane all' reveal anything ?

[D@1984]

no, nothing.