07-29-2020 08:04 AM
hi there i have configured a port channel with 4 total ports.
is there a command i can run that will show the aggregate bandwidth?
ie. 4 x 10 GB ports - 40 GB total throughput ?
how can i see this ?
thanks,
Solved! Go to Solution.
07-29-2020 08:06 AM - edited 07-29-2020 08:08 AM
Try,
sh int poxx
You should see something like this
MTU 1500 bytes, BW 40000000 Kbit/sec, DLY 10 usec
HTH
07-29-2020 08:05 AM
Hello
@nflnetwork wrote:
hi there i have configured a port channel with 4 total ports.
is there a command i can run that will show the aggregate bandwidth?
ie. 4 x 10 GB ports - 40 GB total throughput ?
how can i see this ?
thanks,
show port-channel summary
07-29-2020 08:36 AM
07-29-2020 08:06 AM - edited 07-29-2020 08:08 AM
Try,
sh int poxx
You should see something like this
MTU 1500 bytes, BW 40000000 Kbit/sec, DLY 10 usec
HTH
07-29-2020 08:38 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide