SLB configuration

[ladan.eftetahi]

Hi everybody

we have too many servers in our office.

we want to have 1 ip with load balancing for example for 2 application servers . so, i\our goal is if we call this ip address, the load balancer divide the request between these servers.

I think SLB is one of the solutions,but we have 4503 switch , that I think SLB support only in 6500 series.

could you pls guide me for another solution.

thanks

ladan

[thomas.chen]

SLB is a good choice.

Try the 4840G SLB Switch in this case . It's a good one.

For more details refer the following url,

http://cisco.com/en/US/docs/switches/lan/catalyst4840g/12.0_10_w5_18/release/note/rn104231.html

[ariela]

Hi ladan,

SLB is not a feature only for 6500 (but 6500 works with SLB in hardware ..)

HTH

Andrea