cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
402
Views
0
Helpful
4
Replies
Highlighted
Beginner

slm2008 private network

Is it possible to assign 2 ports to a vlan on this switch and have the 2 machines connected to those ports be able to see each other without having to go off of the switch? If so, how would it need to be setup on the switch?

Everyone's tags (3)
4 REPLIES 4
Highlighted
Advocate

Re: slm2008 private network

Hi,

Yes.

You can create up to 16 vlans

I am enclosing the SLM2008 Admin Guide PDF

Look at  the section for VLANs

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
Highlighted
Beginner

Re: slm2008 private network

Are there any tweaks needed to use the switch when connected to ESX server, have 2 VM's that I'm trying to put on a separate vlan. Nothing I've tried will get them to connect to each other.

Highlighted
Advocate

Re: slm2008 private network

Hi,

Can you supply a detailed diagram of what you are trying to do.

Like have the ports from the switch to be trunked towards the ESX servers ?

What Vlan numbers are involved etc etc ?

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
Highlighted
Beginner

Re: slm2008 private network

All I want to accomplish is put 2 VM's into a heartbeat network for Microsoft clustering. The VM's are on 2 separate hosts, 2nd virtual nic added to each VM. The physical nic on each host is running to the slm2008, connected to ports 2 and 7, created vlan 5 and assigned both of these ports to the vlan. Do i have to use trunking in order to get a connection between the 2 VM's?

CreatePlease to create content
Content for Community-Ad