SMX-ES3-16-P

[andrewbishop18]

Hi,

Can anyone tell me which (if any) routers in the 4000 series the SMX-ES3-16-P card is compatible with?

Thanks in advance.

[Reza Sharifi · Accepted solution]

Hi,

Its compatible with several models.

see link;

http://www.cisco.com/c/en/us/products/routers/4000-series-integrated-services-routers-isr/relevant-interfaces-and-modules.html#ethernet-switch

HTH

[andrewbishop18]

Thanks for your help,

whilst i have your attention, can you tell me which is the NIM equivalent of the 

EHWIC-4ESG ?

As i understand this is a layer 3 card but i can only find layer 2 NIM equivalents.

Thanks.

[Reza Sharifi]

Hi,

I think, NIM-ES2-4 is the equivalent to EHWIC-4ESG.

According to the data sheet it is layer-2 only.

Have a look at the data sheet:

The 4- and 8-port Gigabit Ethernet LAN Switch NIMs provide line-rate Layer 2 switching across onboard Gigabit Ethernet ports. The 4-port NIM has four 10/100/1000 switched Gigabit Ethernet ports. The 8-port NIM has eight 10/100/1000 switched Gigabit Ethernet ports, with a PoE/PoE+ version capable of powering all eight ports. The NIMs furthermore enable direct module-to-module communication through the use of the multigigabit fabric (MGF).

Link:

http://www.cisco.com/c/en/us/products/collateral/routers/3900-series-integrated-services-routers-isr/data_sheet_c78-612808.html

HTH