software install command not available

[maldini.vivek]

Hi all,

Much appreciate your help on this!!

 I normall upgrade/downgrade IOS using command 'software install' which is available in 

Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.03.05SE RELEASE SOFTWARE (fc1)

switch_1#software ?
auto-upgrade    Initiate auto upgrade for switches running incompatible software
clean                  Clean unused package files from local media
commit              Commit the provisioned software and cancel the automatic rollback timer
expand               Expand a software bundle to local storage, default location is where the bundle currently resides
install                 Install software
rollback              Rollback the committed software

But on other IOS given below I can not see that. What is the similar command on this IOS? Or what are the options to upgrade/downgrade on this this IOS?

Cisco IOS Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version Denali 16.1.1E, RELEASE SOFTWARE (fc1)

switch_2#software ?
% Unrecognized command

Thanks

Vivek

[Iulian Vaideanu · Accepted solution]

See section "Changes in software installation CLI commands" on page 4 here:

http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/catalyst3850/software/release/16-1/migration/ol-1611-migration-3850-3650.pdf

[maldini.vivek]

Thanks a lot Lulian. :-)

[JeffreyZhu]

Hello maldini,

currently i faced the same problem you met before and i found the URL link is also unavailable, May I have your help to share the documentation or how to fix the problem above? Thanks.

[Iulian Vaideanu]

Look for "Table 9" here (if it goes away again in the future just google "Changes in software installation CLI commands"):

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-1/release_notes/ol-16-1-3850.html