Solution Inquiry

[fatalXerror]

Hi Guys,

I would like to seek for your assistance since I'm a bit new about this technology sinceI'm more on handling security rather than this.

I'm building a small infra which has 2 ASR1004, and 2 N5K. My 2 ASRs are connected to the existing N7K which goes to their LAN and these ASRs has multiple VRFs. In addition, this will act like router on a stick connecting to the 2 N5Ks which will be configured with VLANs.

My question is, since the ASRs will have VRFs is it possible to only configure 1 VRF facing the N7K then the other VRFs will be configured facing N5Ks? How can the traffic can pass from one VRF to another? I believed that is the challenge here?

Thank you very much.

[acampbell]

Hi,

Have a read at this link about route leaking between VRFs.

http://www.cisco.com/c/en/us/support/docs/multiprotocol-label-switching-mpls/multiprotocol-label-switching-vpns-mpls-vpns/47807-routeleaking.html#diffvrfs

I also found this guys link very helpful

http://blog.ipexpert.com/vrf-route-leaking/

Regards

Alex