cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
586
Views
0
Helpful
10
Replies

some problems when simu in the PT for ospf

daotiansi
Beginner
Beginner

I made a ospf network sime project in the Packet Tracer 5.3. It seemed everything went well, except the Router 1.1.1.2 couldn't learn the connected route (192.168.2.1/24) advised by the Router 1.1.1.4 . That means the ospf protocol could't deliver the route(192.168.2.1/24) across the Area 0.

I make the simu file as an attachment int he post, who can help me ?

Thankyou .

10 Replies 10

cadet alain
Mentor
Mentor

Hi,

I opened your file with PT 5.3 but it is empty.

Cna you make a screenshot of topology and send the running of the gears.

Regards.

Alain.

Don't forget to rate helpful posts.

Hi cadetalain
Thank you very much for checking my file in the PT. Maybe there is something wrong happened when I zipped the simu file.And  now, I rezipped my simu file, and attached it again. If you can't see the topology , you can drag the scroll bars to move the screen.
 
However, if you can't see it either, I'll put the topology and running info into this post.
Regards!