cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
440
Views
0
Helpful
2
Replies

Spanning tree Doubt

opnineopnine
Level 1
Level 1

Hi all,

I have a nexus with the following configs, but my questions goes over vlan 850 will this output be ok ?

Switch is in rapid-pvst mode

Root bridge for: VLAN0001, VLAN0003, VLAN0032-VLAN0034, VLAN0036-VLAN0038
VLAN0040-VLAN0043, VLAN0046-VLAN0047, VLAN0050-VLAN0051, VLAN0055-VLAN0060
VLAN0065-VLAN0066, VLAN0084, VLAN0086-VLAN0096, VLAN0099, VLAN0225, VLAN040
VLAN0440, VLAN0442, VLAN0444, VLAN0446, VLAN0448, VLAN0450-VLAN0454
VLAN0502-VLAN0503, VLAN0507, VLAN0509-VLAN0510, VLAN0517-VLAN0518, VLAN0600
VLAN0850
Port Type Default is disable
Edge Port [PortFast] BPDU Guard Default is disabled
Edge Port [PortFast] BPDU Filter Default is disabled
Bridge Assurance is enabled
Loopguard Default is disabled
Pathcost method used is short
vPC peer-switch is enabled (operational)
STP-Lite is enabled

show spanning-tree vlan 850

VLAN0850
Spanning tree enabled protocol rstp
Root ID Priority 850
Address 0023.04ee.be01
This bridge is the root
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

Bridge ID Priority 850 (priority 0 sys-id-ext 850)
Address 0023.04ee.be01
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

Interface Role Sts Cost Prio.Nbr Type
---------------- ---- --- --------- -------- --------------------------------
Po10 Desg FWD 1 128.4105 (vPC peer-link) Network P2p
Po20 Desg FWD 1 128.4115 (vPC) P2p
Eth1/46 Desg FWD 2 128.174 P2p

Thanks

2 Replies 2

glen.grant
VIP Alumni
VIP Alumni

  Whats the question about vlan 850 ?

It looks to me your vlan 850 is working good.. This switch is the root bridge for this vlan... And ports belonging to it looks good.

What else do u want from this output??