11-11-2009 05:36 AM - edited 03-06-2019 08:33 AM
Hi
Can ssh be applied on Cisco 2960. Are configuration commands same similar to Router.
11-11-2009 07:35 AM
Yes it can, you may need the crypto image though. Here are the commands to configure SSH.
Switch(config)#hostname SwitchOne
SwitchOne(config)#ip domain-name mydomain.com
SwitchOne(config)#crypto key generate rsa
Enter modulus: 1024
SwitchOne(config)#ip ssh time-out 60
SwitchOne(config)#ip ssh authentication-retries 2
SwitchOne(config)#line vty 0 4
SwitchOne(config-line)#transport input ssh
SwitchOne(config-line)#^Z
SwitchOne#write memory
11-11-2009 02:32 PM
Hi.
You _do_ need the crypto image. It's the ones with a k9 in the image name, i.e. c2960-lanbasek9-mz.xxxx
HTH, Ingolf
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide