09-03-2008 05:25 AM - edited 03-06-2019 01:09 AM
We currently have all our catos accepting both SSH and telnet sessions . We need to turn off telnet now . For most except our distr. boxes we do not have any permit lists applied. What is required on catos to shut off telnet for both boxes that do currently have a permit list and ones that do not. To shut off on ones that do not have a list I would think you would enable a telnet ip permit command with no permit list applied but I'm not sure and cannot find docs to support this . any help appreciated.
09-03-2008 05:42 AM
If you do show ip permit and you have:
Telnet permit list disabled.
Then what you need to do is use:
set ip permit enable telnet
and since there are no permit entries for telnet then you will be blocking it for everyone.
If you need to allow some users to still be able to telnet then you can use:
"set ip permit
Hope it helps
09-03-2008 05:55 AM
Thanks Gary, thats what I thought just wanted to verify . For ones that do have a permit list I assume you just do a clear ip permit for the telnet entries ?
09-03-2008 09:55 AM
Correct. That's all you will need.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide