cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2584
Views
0
Helpful
1
Replies

SSH Cisco 3750

lcarbajalparedes
Beginner
Beginner

Hello,

Is there a way how to enable the ssh connection in a cisco switch 3750 Series?

At the moment i was trying to configure the command transport input ssh but the switche didnt support.

Is this an IOS limitation?

My current version us

c3750-ipservices-mz.122-35.SE5/c3750-ipservices-mz.122-35.SE5.bin"

Its an stack about 9 switches.

Regards,

1 Reply 1

Neeraj Arora
Participant
Participant

The IOS (c3750-ipservices-mz.122-35.SE5.bin) being used does not support any encryption, thats why you are not able to configure ssh on vty lines

You need to upgrade the IOS with a featureset which has k9 in it, for eg.:

c3750-ipservicesk9-mz.122-35.SE5.bin

c3750-advipservicesk9-mz.122-35.SE5.bin

If you have a valid CCO id then you can try and download the IOS from this link:

http://www.cisco.com/cisco/software/find.html?q=3750&task=default

Also go through the following document for more info on configuring SSH on routers and switches:

http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml

Hope it helps

Neeraj

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers