08-15-2008 11:18 PM - edited 03-06-2019 12:50 AM
Hi
How to configure SSH for Cisco Catalyst 4500
can I get step by step guide
08-16-2008 03:41 AM
You would not really find the SSH configuration guide for a specific product.
Here is the configuration guide for SSH on Cisco IOS:
http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml
Hope that helps!!
08-16-2008 08:38 AM
During configuration of SSH on 4500 will it impact any connected Servers or VLANS.
I mean anyone will get disconnect.
Its a production BOX.
08-16-2008 02:28 PM
Amin
Just enabling SSH on the 4500 would not impact any connected server or VLANs. If you start to change access privileges (to require SSH and not telnet, etc) then there is possibility of affecting other devices.
HTH
Rick
12-14-2016 09:53 PM
Hi,
We have two cisco catalyst 4500 L3 switch (cat4500e) and running version 15.2(2)E5a.
We are not able to configure ssh on this switch, ssh commands not supported and transport input ssh command also not working.
Any way is there for ssh on 4500e and why command is not working.
12-14-2016 10:01 PM
which ios do you use ? Please give full name :-)
12-14-2016 10:51 PM
IOS- cat4500e-ipbase-mz.152-2.E5a.bin
ssh command is not working in this IOS...
if you know the way to configure ssh on 4500e please tell me
I am also working on the same but till I don't get any solution
12-14-2016 11:09 PM
You need an image with k9 in its name, for example cat4500e-ipbasek9-mz.152-2.E5a.bin.
12-15-2016 01:21 AM
Yes your right need image with k9.... thak you very much Evgeniy
12-15-2016 12:39 AM
Sudhir,
check this command
line vty 0 4
exec-timeout 60 0
password 7 <>
transport input ssh
** please rate if helpful**
08-16-2008 03:05 PM
line vty 0 4
password password
login (depending on what code)
transport input ssh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide