Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Members, I did configure the following ACL list in a switch that allows to host network and deny remaining network traffic but ACL is not working and can ping the rest of the device particular VLAN can someone correct the ACL list? access-list...
Hello Team, I m looking for an option enable AAA Radius in ISE for NAD both switches and wireless controller.Currently, Wireless clients authenticating in ISE Radius Server, calling station id is AP MAC address SSID i added network device ( wireless...
Hello All, I have two L3 interface vlans, Vlan 20 - Wired user and Vlan 30 on L3 same switch. SVI created on Router.On Router interface Gi 0/1 - Wired subnet configured and wireless subnet address configured on sub interface Gi 0/1.30 when wired user...
Hello Members,I do have an AP 2702i-E-k9 AP is not joining to controller which is setup locally. Getting an invalid country code.Country and time set date as below, if i set it for "KZ" " RU Fed "country AP will join. if i remove RU from country list...
All, can we stack WS-C3750G-24TS-S with WS-C3750-48P? WS-C3750-48P | c3750-ipbasek9-mz.122-55.SE4.bin- Master IP baseWS-C3750G-24TS-S | flash:c3750-ipservicesk9-mz.122-52.SE.bin - Going to add in the stack - IP service
Hello Arne, you're WLAN is configured for 802.1X (or MAB or iPSK) then of course you have to specify your RADIUS servers. - WLAN is configured for 802.1X and wireless client able to authenticate sucessfully 1) Are the IP addresses of the RADIUS serv...
