05-25-2010 11:09 PM - modifié 03-06-2019 11:16 AM
Hi,
Today, I have established SSH connection to 2600XM from Poderosa.
But I can not shift to "enable mode" such as following...
****************************************************************************************
R01>enable
Password: c
(When I input first letter of password "cisco", ssh-session disconnect suddenly.)
(R01 accepts another command , for example...)
R01>show version
Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.3(11)T7, RELEASE SOFTWARE (fc3)
****************************************************************************************
I can shift to "enable mode" by serial connection.
(COM1:9600baud)*******************************************************************
R01>enable
Password: cisco
R01#
****************************************************************************************
Additionary, I can establish SSH connection to C2950-24 and shift to enable mode from Poderosa.
(SSH from Poderosa)****************************************************************
SW03>enable
Password: cisco
SW03#show version
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA13, RELEASE SOFTWARE (fc2)
****************************************************************************************
Sorry, I'm not good at English.
Could you help me?
Regards,
Résolu ! Accéder à la solution.
le 05-26-2010 04:50 AM
Hello Okumura,
try to use another software like putty that is freeware
you can find it here:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
sometimes an SSH client can crash for an SSH version mismatch
likely the switch is using SSHv1, the router may be using a later version
Hope to help
Giuseppe
le 05-27-2010 12:40 PM
Hello Okumura,
I simply had the same problem before you
I'm happy you solved
Hope to help
Giuseppe
le 05-26-2010 04:50 AM
Hello Okumura,
try to use another software like putty that is freeware
you can find it here:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
sometimes an SSH client can crash for an SSH version mismatch
likely the switch is using SSHv1, the router may be using a later version
Hope to help
Giuseppe
le 05-26-2010 05:01 PM
Hello Mr.guislar.
Thank you for your reply.
I succeeded by putty!
> sometimes an SSH client can crash for an SSH version mismatch
> likely the switch is using SSHv1, the router may be using a later version
-> This is valuable information for me. Thank you.
Regards,
le 05-27-2010 12:40 PM
Hello Okumura,
I simply had the same problem before you
I'm happy you solved
Hope to help
Giuseppe
le 06-04-2010 01:38 AM
Sorry, I didn't know the rule of this community.
I just clicked some stars.
Regards,
Découvrez et enregistrez vos notes préférées. Revenez pour trouver les réponses d'experts, des guides étape par étape, des sujets récents et bien plus encore.
Êtes-vous nouveau ici? Commencez par ces conseils. Comment utiliser la communauté Guide pour les nouveaux membres