07-04-2007 12:05 AM - edited 03-05-2019 05:07 PM
Hello,
I configured SSH in one of cisco ASA, but i cannot login to it, i made a mistake and didn't configure telnet so i cannot access it, i configured it to authenticate with cisco ACS and i'm sure that the configration is right cuz i did it before in 2 other ASAs, so is there any solution for that.
Thanks
Talal Habeeb
07-04-2007 12:12 AM
Talal,
Did you save the config after configuring the AAA. If not, then you can reload the ASA box and it will come on the default config.
If you have saved the config then you have to do a password recovery. Please follow the link below:
http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/trouble.html#wp1058131
HTH,Please rate if it does.
-amit singh
07-04-2007 07:50 AM
Talal
You describe a problem accessing with SSH and that you did not configure telnet access. Before you get into password recovery there might be a couple of options to consider:
- is it possible to access through the console? If so you might be able to correct the configuration.
- is it possible to access through a web browser? The ASDM could allow you to correct the configuration.
HTH
Rick
07-07-2007 04:29 AM
Hello,
Thank you all, i successfully access it through console and solve this issue.
Thanks
07-07-2007 10:55 AM
Talal
I am glad that my suggestion was able to guide your to the solution and that you have solved your problem.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide