12-19-2017 12:48 AM - edited 03-08-2019 01:09 PM
Hi Sir/Ma'am,
Good Day!
We have a problem on our Cisco WS-C3560G-24TS switch, we don't have the option to configure or enable ssh on our device. Kindly advise what is needed to enable ssh.
SW Version: 12.2(35)SE5
Image Version: c3560-ipbase-mz.122-35.SE5.
Thank you.
Solved! Go to Solution.
12-19-2017 01:23 AM
Hi there,
You need to use an image with 'k9' in the image name. This denotes that crypto functions are included in the image, eg:
c3560-ipbasek9-mz.122-55.SE8.bin
cheers,
Seb.
12-19-2017 05:55 PM
Hi
You are welcome, below you will find the link to download the latest IOS, you need a valid credential.
Hope it is useful
:-)
12-19-2017 01:23 AM
Hi there,
You need to use an image with 'k9' in the image name. This denotes that crypto functions are included in the image, eg:
c3560-ipbasek9-mz.122-55.SE8.bin
cheers,
Seb.
12-19-2017 02:46 AM
Hi
I agree with Seb, you need a K9 IOS. Also you can verify the supported protocols through this link:
http://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/index.jsp
:-)
12-19-2017 05:50 PM
Hi Sir Seb / Sir Julio, thanks for your reply. May we know the compatible ios image that we can use for our switch?
Thanks again.
12-19-2017 05:55 PM
Hi
You are welcome, below you will find the link to download the latest IOS, you need a valid credential.
Hope it is useful
:-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide