SSH Switch capability on Version 12.2(25)

[hambone8204]

Hi Friends,

I'm trying to install SSH on numerous 3560 switches running C3560 Software (C3560-IPBASE-M), Version 12.2(25)SEB4, However, I?m not able to - conf t, crypto key generate rsa to initiate the RSA key. Is it the version or is it me?

Thanks

[CyberDjinn]

look at feature navigator

cisco.com/go/fn

image name contains k letter

[hambone8204]

Great, I have the correct bin file needed for SSH and I'm connected to the router via hyperterminal yet I cannot upload the bin file? I don't have an ftp server to upload it to my flash: copy tftp startup conf etc..on. How can can I get it on my router?

Thanks in advance

[amit-singh]

Hi Friend,

This is the version problem. You are running IP BASE on your switch which doesnot support SSH. To support SSH on you 3560 switch you need the following image : c3560-ipbasek9-mz. The full image name is c3560-ipbasek9-tar.122-25.SEB4.tar.

Catalyst 3560 IP base cryptographic image and device manager files.This image has the Kerberos, SSH, and Layer 2+, and basic Layer 3 routing features.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225seb/ol7189.htm#wp745569

HTH, Please rate if it does.

-amit singh

[hambone8204]

Thanks, This was my first post. Great reponse and quick. I think I found a new homepage. Thanks again.