I have a 6509 running dual sups - (WS-X6K-SUP1A-2GE, WS-F6k-PFC).
If I configure sso or rpr redundancy will the sup's automatically syncrohnise?
Ultimately what I want to ahieve is if I amend configuration on the active sup then save to startup will this config change also replicate to the standby sup?
I have used feature navigator to determine what redundancy features are available & it seems my MSFC IOS - c6msfc2-dsv-mz.121-8a.E4.bin does not support rpr or sso? Is there a command to show me if sso or rpr is available?
Cisco Digital Network Architecture Center Modules (Design Module)Part.3In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module.Cisco DNA Center gives us the flexibility and scalability to configure mult...
Cisco 2509-RJ freezes during start-up I bought some Cisco 2509-RJ terminal server to work on my labs and was working fine. Today I turned it on and half way through starting up it seems to freeze. I can only find one instance of this happing to ...
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...
Connectivity Design considerations and recommendation
1.Management Access connectivity
If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port.
If OOB path is not available, Connect the dedicated Management port to LAN Swi...