stack C3750G & C3750X

[Stefan Engel]

Hi All,

Im trying to stack 3750G & 3750X. As discussed in previous threads I am aware of that the version need to match.

Here the switch details:

Switch Ports Model              SW Version               SW Image

------ ----- -----              ----------            ----------

*    1 24    WS-C3750G-24T      12.2(55)SE7             C3750-IPBASEK9-M

---------------------------------------------------------------------------------------------------------------

* 1 54      WS-C3750X-48      12.2(55)SE7           C3750E-IPBASEK9-M

I have changed the unversival IOS on the 3750X to IPbase..but they still wont come up as a stack.

On the 3750X I dont see any log entry, on 3750G (major version missmatch)

Any ideas?

Thanks,

Stefan

[Leo Laohoo]

Post the "sh log" from the 3750G.

[InayathUlla Sharieff]

In addition also provide the following ouptuts:

show switch >>>>>>>>>>>>>>>>>>>>>>>>>>> To see the Swiutches Master/REady/Provisioned.

show switch details >>>>>>>>>>>>>>>>>This command will tell you if there are any issues with stack ports.

Show switch stack-ports

show switch neighbors

HTH

Regards

Inayath

[Stefan Engel]

unfortunately the log is full of other stuff & I cant see the stck msg anymore.

Switch/Stack Mac Address : 0817.35d8.1c00

                                           H/W   Current

Switch#  Role   Mac Address     Priority Version  State

----------------------------------------------------------

*1       Master 0817.35d8.1c00     15     0       Ready

         Stack Port Status             Neighbors

Switch#  Port 1     Port 2           Port 1   Port 2

--------------------------------------------------------

  1       Down       Down             None     None

BUT I guess, I just fond the issue on the 3750X

License Level: lanbase

License Type: Permanent

Next reload license Level: lanbase

we need IPBase to match with the 3750G

[Leo Laohoo]

Yes.  That'll cause it.