06-12-2013 12:14 AM - edited 03-07-2019 01:50 PM
Hi All,
Im trying to stack 3750G & 3750X. As discussed in previous threads I am aware of that the version need to match.
Here the switch details:
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 24 WS-C3750G-24T 12.2(55)SE7 C3750-IPBASEK9-M
---------------------------------------------------------------------------------------------------------------
* 1 54 WS-C3750X-48 12.2(55)SE7 C3750E-IPBASEK9-M
I have changed the unversival IOS on the 3750X to IPbase..but they still wont come up as a stack.
On the 3750X I dont see any log entry, on 3750G (major version missmatch)
Any ideas?
Thanks,
Stefan
06-12-2013 12:48 AM
Post the "sh log" from the 3750G.
06-12-2013 01:04 AM
In addition also provide the following ouptuts:
show switch >>>>>>>>>>>>>>>>>>>>>>>>>>> To see the Swiutches Master/REady/Provisioned.
show switch details >>>>>>>>>>>>>>>>>This command will tell you if there are any issues with stack ports.
Show switch stack-ports
show switch neighbors
HTH
Regards
Inayath
06-12-2013 01:07 AM
unfortunately the log is full of other stuff & I cant see the stck msg anymore.
Switch/Stack Mac Address : 0817.35d8.1c00
H/W Current
Switch# Role Mac Address Priority Version State
----------------------------------------------------------
*1 Master 0817.35d8.1c00 15 0 Ready
Stack Port Status Neighbors
Switch# Port 1 Port 2 Port 1 Port 2
--------------------------------------------------------
1 Down Down None None
BUT I guess, I just fond the issue on the 3750X
License Level: lanbase
License Type: Permanent
Next reload license Level: lanbase
we need IPBase to match with the 3750G
06-12-2013 01:10 AM
Yes. That'll cause it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide