Resilient Ethernet Protocol (REP)

[gregsummers]

Will Resilient Ethernet Protocol (REP) run on all Cisco switches (2960S and 3010) or is it only available on Service Provider switches like the ME3400E?

[Giuseppe Larosa]

Hello Greg,

my personal impression is that REP will be supported on SP oriented switches and on industrial ethernet switches.

I'm not a Cisco guy so this is just my idea.

Hope to help

Giuseppe

[Bilal Nawaz]

Hello,

REP (Resilient Ethernet Protocol) is supported on:

• MWR2941
• ME4900
• ME3800
• ME3600
• ME3400E
• ME3400
• IE3010
• IE3000
• CAT4948E
• CAT4948-E-F
• CAT4948-10GE
• CAT4948
• CAT4948-10GE
• CAT4900M
• CAT4500E-SUP6L/E
• CAT4500-SUP5/10GE
• CAT4500-SUP4
• CAT4500-SUP2-PLUS-TS/10GE/PLUS
• CAT3750X
• CAT3750-METRO
• CAT3560E
• CAT3560C405
• CAT3560C405EX
• CAT2960C405
• ASR901
• 7600-SUP720/SUP32/RSP720/RSP720-10GE

The CAT2960C405 should have 12.2(55)EX1, 2 or 3 to get this feature set. The 2960S is not there in the list, but maybe because its a newer switch, not too sure. The IE3010 is in the list.

Search the Cisco Feature Navigator here: http://tools.cisco.com/ITDIT/CFN/jsp/by-feature-technology.jsp

Hope this helps

Please rate useful posts & remember to mark any solved questions as answered. Thank you.