StackWise Virtual on 3 x C9500-40X

[tweep9141983]

Hello Everyone,

Anyone here already configured 3 switches for StackWise Virtual?

I have done this on 2 x Cisco C9500-16X-A last year and now I need to do it to 3 x Cisco C9500-40X.

Any help will be greatly appreciated!

All the best!

[Scott Hodgdon · Accepted solution]

tweep9141983,

We do not support StackWise Virtual with more than 2 physical switches as part of the virtual switch. There are no plans for this support.

Cheers,

Scott Hodgdon

Senior Technical Marketing Engineer

Enterprise Networking Group

[AndiBuchmann157]

Hey Scott,

Any Plans on Stackwise Virtual within 4 Chassis?

Best regards, 

Andreas 

[tweep9141983]

Thanks so much! Greatly appreciated.. last quick question though..

Can I use SFP-H10GB-CU1M for the StackWise Virtual Setup, is it 100% compatible?

Because, previously our senior engineer suggested to use SFP-10G-SR, but then I realized since it's for Virtual stacking and the switches are just in the same rack on top of each other. Why would we need use SFP-10G-SR, which is normally for distances greater than 200M, right?

[balaji.bandi]

you can only have 2 members in SVL - but you can join other domain which has 2 SVL.