02-07-2019 02:19 AM
Hi! Does anyone know here what is the command for these tasks?:
Solved! Go to Solution.
02-09-2019 02:45 AM
Hello,
here is the revised lab. I added the static routes (192.168.0.0/17 and 172.168.0.0/22). There was also a lot of other stuff missing, like IP addresses on interfaces and administratively shut interfaces. I cannot test end to end connectivity because the user tabs on all your switches and PCs are locked. On R2, think you also need to creare subinterfaces similar to R1.
02-07-2019 04:17 AM
Hello,
it is hard to see the IP addresses of the VLANs...can you post the Packet Tracer project file (.pkt) ? Make sure to ZIP it first, otherwise the system won't let you upload the file...
02-07-2019 05:42 AM - edited 02-07-2019 05:43 AM
Hi! These are the Ip addresses...or should I really upload the topology?
02-07-2019 05:42 AM
Hi! These are the Ip addresses...or should I really upload the topology?
02-09-2019 02:45 AM
Hello,
here is the revised lab. I added the static routes (192.168.0.0/17 and 172.168.0.0/22). There was also a lot of other stuff missing, like IP addresses on interfaces and administratively shut interfaces. I cannot test end to end connectivity because the user tabs on all your switches and PCs are locked. On R2, think you also need to creare subinterfaces similar to R1.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide