cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
1317
Views
0
Helpful
3
Replies
Rajesh cisco
Beginner

Static RP Configuration PIM vs Candidate RP election

Hi Team,

i have static RP for a group range (225.0.0.0 to 255.0.0.0) and i have configured dynamic RP (bootstrap mechanism) for the same group range.

which one will be elected as RP-SET.

please share your views.

thanks a lot in advance.

regards,

Rajesh kumar V

1 ACCEPTED SOLUTION

Accepted Solutions

Rajesh

Static RP can co-exist with dynamic RP mechanisms (ie: Auto-RP). Dynamically learned RP takes precedence over manually configured RPs. If a router receives Auto-RP information for a multicast group that has manually configured RP information, then the Auto-RP information will be used.

http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-multicast/whitepaper_c11-508498.html

Jon

View solution in original post

3 REPLIES 3
Rajesh cisco
Beginner

Any suggestion very much appreciated.

Rajesh

Static RP can co-exist with dynamic RP mechanisms (ie: Auto-RP). Dynamically learned RP takes precedence over manually configured RPs. If a router receives Auto-RP information for a multicast group that has manually configured RP information, then the Auto-RP information will be used.

http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-multicast/whitepaper_c11-508498.html

Jon

View solution in original post

thanks  jon. now i got clarified. thanks agian.