01-08-2007 01:51 AM - edited 03-05-2019 01:38 PM
Hi,
I have a 1720 running as an edge router. I would like to stop it responding on port 80. I used the "no ip http server" command which is blocking http requests, but as i said i would like the router not to respond at all.
Can anyone give any pointers on this.
Many Thanks
J mack
01-08-2007 03:58 AM
John
try configuring no ip unreachable on the interface through which the port 80 request is received (perhaps on all your interfaces to be consistent). This should stop responses.
HTH
Rick
01-08-2007 03:58 AM
Hi,
You can configure a ACL and block the incoming HTTP request ( tcp port 80) to the Router's ip address.
Bind this ACL in the incoming direction of the edge link in your router. ( if you want to block the incoming http request from the WAN side)
Additionally you can bind the same ACL on the ethernet interfaces of the router, if required to block the port 80 access completely to the router.
Hope this helps.
-VJ
01-08-2007 08:55 AM
Thanks Guys i've configured both suggestions will test this evening.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide