Any suggestions of what to try to fix the outside for this 831? Here's the setup. It's connecting to another internal router which runs through the building's infrastructure to a faceplate in a computer lab. Testing the inside setup with Ubuntu desktop, I was able to get assigned to the 10.0.0.0 network. However, ping has no route to the internet.
What's stopping this from getting outside?
Here's the current running-config:
version 12.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname drizzledrazzle ! logging queue-limit 100 ! enable secret 5 [password] enable password [password] ! ip subnet-zero no ip routing ! ip dhcp pool DHCP import all network 10.0.0.0 255.255.255.0 default-router 10.0.0.1 lease infinite ! ! ip audit notify log ip audit po max-events 100 no ftp-server write-enable ! ! ! ! ! ! ! interface Ethernet0 description Internal LAN ip address 10.0.0.1 255.255.255.0 ip nat inside no ip route-cache no ip mroute-cache no cdp enable hold-queue 100 out ! interface Ethernet1 description Internet ip address dhcp ip nat outside no ip route-cache no ip mroute-cache no shutdown duplex auto no cdp enable ! ip nat inside source list 100 interface Ethernet1 overload ip classless ip http server no ip http secure-server ! access-list 100 permit ip any any ! line con 0 exec-timeout 0 0 no modem enable stopbits 1 description Internet ip address dhcp ip nat outside no ip route-cache no ip mroute-cache shutdown duplex auto no cdp enable ! ip nat inside source list 100 interface Ethernet1 overload ip classless ip http server no ip http secure-server ! access-list 100 permit ip any any ! line con 0 exec-timeout 0 0 no modem enable stopbits 1 line vty 0 4 password [password] login ! scheduler max-task-time 5000 ! end
Solved! Go to Solution.
I changed #2 to no effect. Here's the output for #1,
#sh ip ro Default gateway is not set Host Gateway Last Use Total Uses Interface ICMP redirect cache is empty
Looking how to solve this...
Here's another example config from a tutorial site for an 806 behind another router.  This is similar to my configuration.
Does it matter that my internal ip is 10.0.0.0 and the external ip from the current network is 10.0.0.0 as well? Should I change this to 192.168.0.0 or 10.10.10.0? Is this a possible conflict?
Fact is the router is getting DHCP from the external network and my internal NAT is assigning IPs, but they're just not connecting.
From the 806 example, there is this line:
ip route 0.0.0.0 0.0.0.0 220.127.116.11 !--- IP address 18.104.22.168 is the next hop IP address, also called !--- the default gateway. Your Internet service provider (ISP) can tell you what IP address to !--- configure as the next hop address.
I've replaced with this, simply because the external, which I receive at Ethernet1 is dhcp, and I don't know what it's going to be.
ip route 0.0.0.0 0.0.0.0 Ethernet1
What am I missing here?
Apologies for this, I missed your post a while back.
Can you post your full configuration at the moment together with a "sh ip route".
What exactly do you mean by packet loss ie. what symptoms are you seeing ?
No worries. It's a free country. haha.
Here's my current running config
version 12.2 no parser cache no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname drizzledrazzle ! logging queue-limit 100 no logging console enable secret 5 $1$/7YO$wqJvklE9jh9fuaa.r2HEN1 enable password [password] ! ip subnet-zero ! ip dhcp pool CLIENT import all network 10.10.10.0 255.255.255.0 default-router 10.10.10.1 ! ! ip audit notify log ip audit po max-events 100 no ftp-server write-enable ! interface Ethernet0 description Internal LAN ip address 10.10.10.1 255.255.255.0 ip nat inside no ip route-cache no ip mroute-cache no cdp enable hold-queue 100 out ! interface Ethernet1 description Internet ip address dhcp ip nat outside no ip route-cache no ip mroute-cache duplex auto no cdp enable ! ip nat inside source list 102 interface Ethernet1 overload ip classless ip route 0.0.0.0 0.0.0.0 Ethernet1 ip http server no ip http secure-server ! access-list 102 permit ip 10.10.10.0 0.0.0.255 any no cdp run ! line con 0 exec-timeout 0 0 no modem enable stopbits 1 line aux 0 stopbits 1 line vty 0 4 password [password] login local length 0 ! scheduler max-task-time 5000 ! end
drizzledrazzle#show ip ro Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 10.0.0.0/24 is subnetted, 1 subnets C 10.10.10.0 is directly connected, Ethernet0
And here's one more thing showing the ip assigned to the router, which shows up at restart:
Translating "eneiiiiee"...domain server (10.0.20.10) (10.0.1.16) % Unknown command or computer name, or unable to find computer address
I don't think I can describe it any better without more information. It appears to me the router gets an ip from the external network (LAN) and my computer connected to the router gets an ip from the internal network. But I still get no route to Host with a ping.
Here's a post from supportforums.cisco.com  describing a default route through dhcp with dhcp as the last argument of `ip route`
drizzledrazzle#conf t Enter configuration commands, one per line. End with CNTL/Z. drizzledrazzle(config)#ip route 0.0.0.0 0.0.0.0 dhcp ^ % Invalid input detected at '^' marker.
Is your outside interface up/up because if it was your routing table should show the static route you have in the configuration but it isn't.
What does a "sh ip int brief" show ?
This is frustrating. I can find detailed instructions for something like the 806 router , but this doesn't workout on the 831 router. Previously, when I've asked for assistance on this unit (before I bought an 871W and gave up for my personal use) one thing was people were giving me commands which didn't apply to this unit--no wonder I got it for $15 on ebay ! But this darn thing worked once.
drizzledrazzle#show ip int brief Interface IP-Address OK? Method Status Protocol Ethernet0 10.10.10.1 YES NVRAM up up Ethernet1 10.0.20.105 YES DHCP up up
I'm still really interested in solving this problem. Anyone able to help?
PS> Sorry about the "correct answer" thing, I accidentally clicked this and then tried to click it off. This ended up giving me three incorrect "correct answers"!