09-29-2011 11:15 PM - edited 03-07-2019 02:32 AM
Hi folks,
we use event manager and tcl-script in an simple way on catalyst65/catalyst45-platforms (gathering arp- and mac-adress-caches).
But I found nothing similar in the new sup7e (using IOS-XE Version 03.01.01.SG).
So, is there a way to use "event manager" on sup7e or is there another concept for that? And if not, will it come?
Regards
Peter
09-29-2011 11:23 PM
If you look at the release notes of 3.1.1, the EEM is supported(2.0)
But requires a LAN-BASE or enterprise license.
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_23474.html
09-29-2011 11:31 PM
I've looked at software advisor and try to find sup7e, biut no luck.
"sh ver" shows:
License Level: lanbase
but there are no commands available like "sh event manager ..."
or in config-mode: "event manager policy ...", "event manager applet ..." or "event manager directory ..."
09-29-2011 11:37 PM
just looked up the release notes:
"embedded event manager" in Lanbase is NOT supported, but in IP base and enterprise
so i have to upgrade.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide