11-12-2008 08:47 PM - edited 03-06-2019 02:27 AM
Hi everybody:
I have two catalyst 6509 with supervisor engine redundandy; first one has the module 5 active and the second has the module 6 active.
Is there a way to change configuration to set wich module will be active? I want to configure the same module active in both boxes.
Thank you for your comments.
Solved! Go to Solution.
11-12-2008 08:59 PM
Whichever Supervisor boots up first will be the active one. There isn't a command to specify a priority for this.
With that say, you can manually force a switchover if you want the current standby Supervisor as active.
HTH,
__
Edison.
11-12-2008 08:59 PM
Whichever Supervisor boots up first will be the active one. There isn't a command to specify a priority for this.
With that say, you can manually force a switchover if you want the current standby Supervisor as active.
HTH,
__
Edison.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide